Step 1 - Inspection
Step 2 - Controls removed
Step 3 - Paint removal
Step 4 - Cleaning
Step 5 - Etch
Step 6 - Dent repair
Step 7 - Alodine
Step 8 - Primer
Step 9 - Base coat
Step 10 - Stripes & Graphics
Step 11 - New hardware
Step 12 - Controls balanced
Controls are balanced and checked for travel according to maintenance manuals. Bearings are lubed. Worn bolts are replaced using new nuts and washers.
Step 13 - Placards
Step 14 - Finishing up
Step 15 - Customer inspection
Previous Next